​Installation procedure

Equipment

• Personal protection equipment including safety glasses

• Concrete drilling machine

• 6 mm concrete drill bit

• Dust blower and brush

• Hammer

 

1. Place the fixture in the required location.

2. Drill the anchor hole to the required depth.

3. Clean out the dust and debris from the hole.

4. Lightly tap the anchor through the fixture into the hole until the head touches the top of the fixture.

5. Hammer the wedge pin until it is flush with the top of the anchor head. Please note that in high strength concrete, it may not be possible to hammer the pin all the way flush.

The fixture can now be loaded.