top of page
TNX Nylon Hammer Plugs
Description
Light duty nylon anchors suitable for permanent fixing to concrete and masonry. Countersunk headed for flush fixing applications. Completely removable.
​
Materials
-
Carbon and Alloy Steels Bright Zinc Plated 5 microns
-
Stainless Steels Grades A2, A4 according to ISO 3506
​
Dimensions​
Performance Data
Installation information
* If the substrate has been plastered, then the drill depth must be increased by the corresponding plaster thickness Holes in masonry must be drilled with rotary action only , hammer drilling is not advisable​
​
​Installation procedure
Equipment
-
Drilling machine
-
Drill bit of correct diameter
-
Hammer
-
Air blower or compressed air with nozzle
-
Person Protection Equipment (PPE) including gloves.
1. Drill clearance holes in the fixture. Countersink the holes if a flush fixing is required.
2. Position the fixture in place.
3. Using the holes in the fixture as a guide, drill holes in the substrate to the required depth.
4. Blow the dust and debris out of the holes.
5. Insert an anchor through the fixture into the hole.
6. Lightly tap with the hammer until the nylon sleeve is flush with the surface of the fixture.
7. Hammer the screw into the sleeve until flush
8. Repeat the process until all anchors have been installed. The fixture can now be loaded.
bottom of page