TCS Concrete Screw
TCS Concrete Screw
Description
Thread cutting hardened screw suitable for permanent fixing to concrete and masonry. Hexagonal head comes with integrated washer to accommodate oversized and or slotted holes. Countersunk head for flush fixing.
Materials
Carbon and Alloy Steels AISI C 1022, Hardened - Zinc Plated or Ruspert > 500 hours salt spray resistant
Stainless Steels Grades A4 according to ISO 3506 on request
Dimensions
Size, D | 6.0 | 8.0 | 10.0 | 12.0 | 16.0 | |
Length, l | mm | 60 | 60 - 100 | 75 - 110 | 85 - 120 | 80 - 135 |
Drive size, s | mm | 8 | 10 | 13 | 15 | 18 |
Size, D | 6.0 | 8.0 | 10.0 | 12.0 | |
Length, l | mm | 60 - 100 | 70 - 110 | 80 - 120 | 100 - 140 |
Drive size, s | T 30 | T 30 | T 40 | T 50 |
Performance Data
Design Resistance
Size, D | 6.0 | 8.0 | 10.0 | 12.0 | 16.0 | |
Tensile in C20/25 Concrete | kN | 3.1 | 5.0 | 6.7 | 11.1 | 26.7 |
Shear in C20/25 Concrete | kN | 5.6 | 6.0 | 13.0 | 18.5 | 36.3 |
Tensile in Solid Masonry | kN | 2.0 | 3.1 | 3.6 | 4.0 | - |
Shear in Solid Masonry | kN | 1.8 | 2.4 | 3.2 | 3.8 | - |
Tensile in Hollow Masonry | kN | 1.5 | 2.0 | 2.4 | 2.8 | - |
Shear in Hollow Masonry | kN | 1.2 | 1.8 | 2.3 | 2.8 | - |
Bending resistance | N-m | 8.4 | 12.1 | 28.0 | 46.1 | 157.2 |
Loads indicated are for a single screw without consideration of screw to screw spacing and distance to the edge if any. * Loads are for holes in masonry that were drilled using rotary action only - hammer drilling is not recommended in masonry.
