top of page
TQ Universal Plug
Description
Light to medium duty nylon anchors suitable for permanent fixing to concrete and masonry. Available as a set for convenient selection.
Materials
-
Carbon and Alloy Steels Bright Zinc Plated 5 microns
-
Stainless Steels Grades A2, A4 according to ISO 3506
Dimensions
Performance Data
Recommended Resistance
Installation information
* If the substrate has been plastered, then the drill depth must be increased by the corresponding plaster thickness Holes in masonry must be drilled with rotary action only , hammer drilling is not advisable
Installation procedure
Equipment
-
Drilling machine
-
Drill bit of correct diameter
-
Screw Driver with matching bit
-
Air blower or compressed air with nozzle
-
Person Protection Equipment (PPE) including gloves.
1. Drill clearance holes in the fixture. Countersink the holes if a flush fixing is required.
2. Drill holes in the base material.
3. Blow the dust and debris out of the holes.
4. Tap the nylon plug into the hole until the collar touches the surface
5. Position the fixture in place
6. Drive the screw into the plug until snug
7. Repeat the process until all screws have been installed. The fixture can now be loaded.
bottom of page